× List the Glasspar boats you have found around your town, state, classifieds or other resource. Or list your own boat for sale here!


Did you know you can have multiple images on a post?
Simply keep adding images until you are done. You may also "insert" an image into the post rather than just attaching it!

Topic-icon 1958/1959 Club Lido Trim/Hardware Available

  • gwbell
  • gwbell's Avatar Topic Author
  • Offline
  • Forum Moderator
  • Forum Moderator
More
3 years 10 months ago #27725 by gwbell
Posted on behalf of Eduardo:

Have the trim/hardware available removed from a 1958/1959 Club Lido. Boat was not worth salvaging and has been dumped. Includes one seat bracket that is also used in the early model G-3's. Perfect for restoration project.

Trim/hardware is aluminum, not pot metal. The trim are not pitted or corroded in any way. They are clean. These will cleanup beautifully and with polishing, they will look better than new.

No set price, just looking for best offer. Buyer to pay shipping costs.

Parts located in the Sacramento, CA area

Contact Eduardo
eduardo dot nanca at edd dot ca dot gov


Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #27731 by Macadoo
Replied by Macadoo on topic 1958/1959 Club Lido Trim/Hardware Available
I NEED THE 3 SEAT BRACES AND ALSO THE 3 CLEATS. How much for these parts ? Thanks for posting. Tim

Please Log in or Create an account to join the conversation.

  • gwbell
  • gwbell's Avatar Topic Author
  • Offline
  • Forum Moderator
  • Forum Moderator
More
3 years 10 months ago #27735 by gwbell
Replied by gwbell on topic 1958/1959 Club Lido Trim/Hardware Available
Tim,

You'll need to email Eduardo directly. I don't believe he frequents our site.

George

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #27736 by Macadoo
Replied by Macadoo on topic 1958/1959 Club Lido Trim/Hardware Available
Got-it I'll send Eduardo an email. Thanks so much for the lead. Tim

Please Log in or Create an account to join the conversation.

Moderators: gwbell
Time to create page: 0.218 seconds
Powered by Kunena Forum