× List the Glasspar boats you have found around your town, state, classifieds or other resource. Or list your own boat for sale here!


Did you know you can have multiple images on a post?
Simply keep adding images until you are done. You may also "insert" an image into the post rather than just attaching it!

Topic-icon If you need Seafair Sedan parts please let us know

More
5 years 5 months ago #26387 by rjcullis
I need the actual "Seafair Sedan" logos that go on either side of the cabin, I also need the handles that go on either side of the entry way into the cabin, I would also be interested in a Glasspar logo to go on the exterior of the hull at the stern.

Please Log in or Create an account to join the conversation.

More
5 years 5 months ago #26388 by rjcullis
I just thought of one more thing I would like if you have it. That is the rarely found additional hand rail that could be found flowing around about an inch above the upper windscreen.

Thanks,
Richard

Please Log in or Create an account to join the conversation.

More
5 years 5 months ago #26422 by rjcullis
What type of steering wheel does it have?

Please Log in or Create an account to join the conversation.

More
5 years 5 months ago #26511 by rjcullis
have you decided if you are going to part it out yet...Richard

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago #29795 by Michael123
I have a 1967 Glasspar Seafair Sedan that I need some windshield parts for do you have any or do you know where I might be able to get some? Thanks!

Michael

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #29800 by 16again
I have some 1960 parts that I can part with but not sure of their correctness for a 67. Let me know what you need, a picture would be helpful even if its from an ad and you just circle what you need. Please contact me at This email address is being protected from spambots. You need JavaScript enabled to view it. This will be a lot easier than using he forum.
Jack

Please Log in or Create an account to join the conversation.

Moderators: gwbell
Time to create page: 0.225 seconds
Powered by Kunena Forum